If you have a SFU account, please login. It will be easier for us and you to keep track of your info if you do.

Last name: 

First name: 

Email address: 

This field is required.

Please note:

This entire form will be deleted after 14 days of being inactive.

Student Name: 

SFU ID:

Please enter your SFU ID number if known.

Email Address: 

Home Country: 

Home University: 

Degree Program at Home University: 

Please enter the degree you are pursuing at your home institution (e.g. Engineering, Computer Science, etc)

Exchange Term: 

Fall 2024 Spring 2025 Summer 2025 Fall 2025 Spring 2026 Summer 2026 Fall 2026 Spring 2027 Summer 2027 Fall 2027 Spring 2028 Summer 2028 Fall 2028 Spring 2029 Summer 2029

Is this form for your 1st term or 2nd term of exchange?: 

• 1st Exchange term @ SFU
• 2nd Exchange term @ SFU

You may only submit course requests for one upcoming term at a time. You are required to submit a new form before the next term enrollment period if you are staying at SFU for a 2nd term of exchange.

Home University Transcript: 

Please upload a copy of your transcript from your home university showing all courses taken and final grades.

Detailed Course Outlines: 

Please submit detailed course outlines for all courses being used as pre-requisites as part of this request in one pdf file. If outlines are in a language other than English, please submit English translations.

---

MSE Course 1: 

MSE 100 - Engineering Graphics and Design MSE 101W - Process, Form and Convention in Professional Genres MSE 102 - Applied Science, Technology and Society MSE 110 - Mechatronics Design I MSE 210 - Engineering Measurement and Data Analysis MSE 220 - Engineering Materials MSE 221 - Statics and Strength of Materials MSE 222 - Kinematics & Dynamics of Rigid Bodies & Mechanisms MSE 223 - Intro to Fluid Mechanics MSE 250 - Electric Circuits MSE 251 - Electronic Circuits MSE 280 - Linear Systems MSE 300 - The Business of Engineering I: Fundamentals MSE 310 - Intro to Electro-Mechanical Sensors and Actuators MSE 311 - Intro to Microelectromechanical Systems MSE 312 - Mechatronics Design II MSE 320 - Machine Design MSE 321 - Engineering Thermodynamics and Heat Transfer MSE 352 - Digital Logic and Microcontrollers MSE 353 - Power Electronics & Electric Machinery MSE 380 - Systems Modeling and Simulation MSE 381 - Feedback Control Systems MSE 211 - Computational Methods for Engineers MSE 400 - The Business of Engineering II: Applications and Commercialization MSE 401W - Project Documentation and Group Dynamics MSE 402 - Engineering Ethics, Law and Professional Practice MSE 410 - Capstone Design Technical Project I MSE 411 - Capstone Design Technical Project II MSE 420 - Introduction to Biomechanical Engineering MSE 421 - Advanced Vibration MSE 422 - Fuel Cell Systems MSE 423 - Energy Conversion MSE 424 - Microfluidics MSE 425 - Nano Manufacturing for Nano-scale Devices MSE 426 - Introduction to Engineering Design Optimization MSE 427 - Finite Element Analysis MSE 429 - Advanced Kinematics for Robotic System MSE 450 - Real-Time and Embedded Control Systems MSE 451 - Advanced Electronic Circuits MSE 480 - Manufacturing Systems MSE 481 - Industrial Control Systems MSE 483 - Modern Control Systems MSE 405w - The Business of Engienering II, Entrepreneurship for Engineers MSE 428 - Design of Mechanism MSE 452 - Power conversion in Alternative Energy Systems MSE 413 - Machine Learning in Mechatronics

Please identify your first preference MSE course.

Is this course being offered for your exchange term?: 

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?: 

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?: 

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?: 

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?: 

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

MSE Course 2:

— MSE 100 - Engineering Graphics and Design MSE 101W - Process, Form and Convention in Professional Genres MSE 102 - Applied Science, Technology and Society MSE 110 - Mechatronics Design I MSE 210 - Engineering Measurement and Data Analysis MSE 220 - Engineering Materials MSE 221 - Statics and Strength of Materials MSE 222 - Kinematics & Dynamics of Rigid Bodies & Mechanisms MSE 223 - Intro to Fluid Mechanics MSE 250 - Electric Circuits MSE 251 - Electronic Circuits MSE 280 - Linear Systems MSE 300 - The Business of Engineering I: Fundamentals MSE 310 - Intro to Electro-Mechanical Sensors and Actuators MSE 311 - Intro to MEMS MSE 312 - Mechatronics Design II MSE 320 - Machine Design MSE 321 - Engineering Thermodynamics and Heat Transfer MSE 352 - Digital Logic and Microcontrollers MSE 353 - Power Electronics & Electric Machinery MSE 380 - Systems Modeling and Simulation MSE 381 - Feedback Control Systems MSE 211 - Computational Methods for Engineers MSE 400 - The Business of Engineering II: Applications and Commercialization MSE 401W - Project Documentation and Group Dynamics MSE 402 - Engineering Ethics, Law and Professional Practice MSE 410 - Capstone Design Technical Project I MSE 411 - Capstone Design Technical Project II MSE 420 - Introduction to Biomechanical Engineering MSE 421 - Advanced Vibration MSE 422 - Fuel Cell Systems MSE 423 - Energy Conversion MSE 424 - Microfluidics MSE 425 - Nano Manufacturing for Nano-scale Devices MSE 426 - Introduction to Engineering Design Optimization MSE 427 - Finite Element Analysis MSE 429 - Advanced Kinematics for Robotic System MSE 450 - Real-Time and Embedded Control Systems MSE 451 - Advanced Electronic Circuits MSE 480 - Manufacturing Systems MSE 481 - Industrial Control Systems MSE 483 - Modern Control Systems MSE 405w - The Business of Engineering II, Entrepreneurship for Engineers MSE 428 - Design of Mechanism MSE 452 - Power Conversion in Alternative Energy Systems MSE 413 - Machine Learning in Mechatronics

Please identify your second preference MSE course if applicable.

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

MSE Course 3:

— MSE 100 - Engineering Graphics and Design MSE 101W - Process, Form and Convention in Professional Genres MSE 102 - Applied Science, Technology and Society MSE 110 - Mechatronics Design I MSE 210 - Engineering Measurement and Data Analysis MSE 220 - Engineering Materials MSE 221 - Statics and Strength of Materials MSE 222 - Kinematics & Dynamics of Rigid Bodies & Mechanisms MSE 223 - Intro to Fluid Mechanics MSE 250 - Electric Circuits MSE 251 - Electronic Circuits MSE 280 - Linear Systems MSE 300 - The Business of Engineering I: Fundamentals MSE 310 - Intro to Electro-Mechanical Sensors and Actuators MSE 311 - Intro to MEMS MSE 312 - Mechatronics Design II MSE 320 - Machine Design MSE 321 - Engineering Thermodynamics and Heat Transfer MSE 352 - Digital Logic and Microcontrollers MSE 353 - Power Electronics & Electric Machinery MSE 380 - Systems Modeling and Simulation MSE 381 - Feedback Control Systems MSE 211 - Computational Methods for Engineers MSE 400 - The Business of Engineering II: Applications and Commercialization MSE 401W - Project Documentation and Group Dynamics MSE 402 - Engineering Ethics, Law and Professional Practice MSE 410 - Capstone Design Technical Project I MSE 411 - Capstone Design Technical Project II MSE 420 - Introduction to Biomechanical Engineering MSE 421 - Advanced Vibration MSE 422 - Fuel Cell Systems MSE 423 - Energy Conversion MSE 424 - Microfluidics MSE 425 - Nano Manufacturing for Nano-scale Devices MSE 426 - Introduction to Engineering Design Optimization MSE 427 - Finite Element Analysis MSE 429 - Advanced Kinematics for Robotic System MSE 450 - Real-Time and Embedded Control Systems MSE 451 - Advanced Electronic Circuits MSE 480 - Manufacturing Systems MSE 481 - Industrial Control Systems MSE 483 - Modern Control Systems MSE 405w - The Business of Engineering II, Entrepreneurship for Engineers MSE 428 - Design of Mechanism MSE 452 - Power Conversion in Alternative Energy Systems MSE 413 - Machine Learning in Mechatronics

Please identify your third preference MSE course if applicable.

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

MSE Course 4:

— MSE 100 - Engineering Graphics and Design MSE 101W - Process, Form and Convention in Professional Genres MSE 102 - Applied Science, Technology and Society MSE 110 - Mechatronics Design I MSE 210 - Engineering Measurement and Data Analysis MSE 220 - Engineering Materials MSE 221 - Statics and Strength of Materials MSE 222 - Kinematics & Dynamics of Rigid Bodies & Mechanisms MSE 223 - Intro to Fluid Mechanics MSE 250 - Electric Circuits MSE 251 - Electronic Circuits MSE 280 - Linear Systems MSE 300 - The Business of Engineering I: Fundamentals MSE 310 - Intro to Electro-Mechanical Sensors and Actuators MSE 311 - Intro to MEMS MSE 312 - Mechatronics Design II MSE 320 - Machine Design MSE 321 - Engineering Thermodynamics and Heat Transfer MSE 352 - Digital Logic and Microcontrollers MSE 353 - Power Electronics & Electric Machinery MSE 380 - Systems Modeling and Simulation MSE 381 - Feedback Control Systems MSE 211 - Computational Methods for Engineers MSE 400 - The Business of Engineering II: Applications and Commercialization MSE 401W - Project Documentation and Group Dynamics MSE 402 - Engineering Ethics, Law and Professional Practice MSE 410 - Capstone Design Technical Project I MSE 411 - Capstone Design Technical Project II MSE 420 - Introduction to Biomechanical Engineering MSE 421 - Advanced Vibration MSE 422 - Fuel Cell Systems MSE 423 - Energy Conversion MSE 424 - Microfluidics MSE 425 - Nano Manufacturing for Nano-scale Devices MSE 426 - Introduction to Engineering Design Optimization MSE 427 - Finite Element Analysis MSE 429 - Advanced Kinematics for Robotic System MSE 450 - Real-Time and Embedded Control Systems MSE 451 - Advanced Electronic Circuits MSE 480 - Manufacturing Systems MSE 481 - Industrial Control Systems MSE 483 - Modern Control Systems MSE 405w - The Business of Engineering II, Entrepreneurship for Engineers MSE 428 - Design of Mechanism MSE 452 - Power Conversion in Alternative Energy Systems MSE 413 - Machine Learning in Mechatronics

Please identify your fourth preference MSE course if applicable.

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

MSE Course 5:

— MSE 100 - Engineering Graphics and Design MSE 101W - Process, Form and Convention in Professional Genres MSE 102 - Applied Science, Technology and Society MSE 110 - Mechatronics Design I MSE 210 - Engineering Measurement and Data Analysis MSE 220 - Engineering Materials MSE 221 - Statics and Strength of Materials MSE 222 - Kinematics & Dynamics of Rigid Bodies & Mechanisms MSE 223 - Intro to Fluid Mechanics MSE 250 - Electric Circuits MSE 251 - Electronic Circuits MSE 280 - Linear Systems MSE 300 - The Business of Engineering I: Fundamentals MSE 310 - Intro to Electro-Mechanical Sensors and Actuators MSE 311 - Intro to MEMS MSE 312 - Mechatronics Design II MSE 320 - Machine Design MSE 321 - Engineering Thermodynamics and Heat Transfer MSE 352 - Digital Logic and Microcontrollers MSE 353 - Power Electronics & Electric Machinery MSE 380 - Systems Modeling and Simulation MSE 381 - Feedback Control Systems MSE 211 - Computational Methods for Engineers MSE 400 - The Business of Engineering II: Applications and Commercialization MSE 401W - Project Documentation and Group Dynamics MSE 402 - Engineering Ethics, Law and Professional Practice MSE 410 - Capstone Design Technical Project I MSE 411 - Capstone Design Technical Project II MSE 420 - Introduction to Biomechanical Engineering MSE 421 - Advanced Vibration MSE 422 - Fuel Cell Systems MSE 423 - Energy Conversion MSE 424 - Microfluidics MSE 425 - Nano Manufacturing for Nano-scale Devices MSE 426 - Introduction to Engineering Design Optimization MSE 427 - Finite Element Analysis MSE 429 - Advanced Kinematics for Robotic System MSE 450 - Real-Time and Embedded Control Systems MSE 451 - Advanced Electronic Circuits MSE 480 - Manufacturing Systems MSE 481 - Industrial Control Systems MSE 483 - Modern Control Systems MSE 405w - The Business of Engineering II, Entrepreneurship for Engineers MSE 428 - Design of Mechanism MSE 452 - Power Conversion in Alternative Energy Systems MSE 413 - Machine Learning in Mechatronics

Please identify your fifth preference MSE course if applicable.

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

MSE Course 6:

— MSE 100 - Engineering Graphics and Design MSE 101W - Process, Form and Convention in Professional Genres MSE 102 - Applied Science, Technology and Society MSE 110 - Mechatronics Design I MSE 210 - Engineering Measurement and Data Analysis MSE 220 - Engineering Materials MSE 221 - Statics and Strength of Materials MSE 222 - Kinematics & Dynamics of Rigid Bodies & Mechanisms MSE 223 - Intro to Fluid Mechanics MSE 250 - Electric Circuits MSE 251 - Electronic Circuits MSE 280 - Linear Systems MSE 300 - The Business of Engineering I: Fundamentals MSE 310 - Intro to Electro-Mechanical Sensors and Actuators MSE 311 - Intro to MEMS MSE 312 - Mechatronics Design II MSE 320 - Machine Design MSE 321 - Engineering Thermodynamics and Heat Transfer MSE 352 - Digital Logic and Microcontrollers MSE 353 - Power Electronics & Electric Machinery MSE 380 - Systems Modeling and Simulation MSE 381 - Feedback Control Systems MSE 211 - Computational Methods for Engineers MSE 400 - The Business of Engineering II: Applications and Commercialization MSE 401W - Project Documentation and Group Dynamics MSE 402 - Engineering Ethics, Law and Professional Practice MSE 410 - Capstone Design Technical Project I MSE 411 - Capstone Design Technical Project II MSE 420 - Introduction to Biomechanical Engineering MSE 421 - Advanced Vibration MSE 422 - Fuel Cell Systems MSE 423 - Energy Conversion MSE 424 - Microfluidics MSE 425 - Nano Manufacturing for Nano-scale Devices MSE 426 - Introduction to Engineering Design Optimization MSE 427 - Finite Element Analysis MSE 429 - Advanced Kinematics for Robotic System MSE 450 - Real-Time and Embedded Control Systems MSE 451 - Advanced Electronic Circuits MSE 480 - Manufacturing Systems MSE 481 - Industrial Control Systems MSE 483 - Modern Control Systems MSE 405w - The Business of Engineering II, Entrepreneurship for Engineers MSE 428 - Design of Mechanism MSE 452 - Power Conversion in Alternative Energy Systems MSE 413 - Machine Learning in Mechatronics

Please identify your sixth preference MSE course.

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term

---

MSE Course 7:

— MSE 100 - Engineering Graphics and Design MSE 101W - Process, Form and Convention in Professional Genres MSE 102 - Applied Science, Technology and Society MSE 110 - Mechatronics Design I MSE 210 - Engineering Measurement and Data Analysis MSE 220 - Engineering Materials MSE 221 - Statics and Strength of Materials MSE 222 - Kinematics & Dynamics of Rigid Bodies & Mechanisms MSE 223 - Intro to Fluid Mechanics MSE 250 - Electric Circuits MSE 251 - Electronic Circuits MSE 280 - Linear Systems MSE 300 - The Business of Engineering I: Fundamentals MSE 310 - Intro to Electro-Mechanical Sensors and Actuators MSE 311 - Intro to MEMS MSE 312 - Mechatronics Design II MSE 320 - Machine Design MSE 321 - Engineering Thermodynamics and Heat Transfer MSE 352 - Digital Logic and Microcontrollers MSE 353 - Power Electronics & Electric Machinery MSE 380 - Systems Modeling and Simulation MSE 381 - Feedback Control Systems MSE 211 - Computational Methods for Engineers MSE 400 - The Business of Engineering II: Applications and Commercialization MSE 401W - Project Documentation and Group Dynamics MSE 402 - Engineering Ethics, Law and Professional Practice MSE 410 - Capstone Design Technical Project I MSE 411 - Capstone Design Technical Project II MSE 420 - Introduction to Biomechanical Engineering MSE 421 - Advanced Vibration MSE 422 - Fuel Cell Systems MSE 423 - Energy Conversion MSE 424 - Microfluidics MSE 425 - Nano Manufacturing for Nano-scale Devices MSE 426 - Introduction to Engineering Design Optimization MSE 427 - Finite Element Analysis MSE 429 - Advanced Kinematics for Robotic System MSE 450 - Real-Time and Embedded Control Systems MSE 451 - Advanced Electronic Circuits MSE 480 - Manufacturing Systems MSE 481 - Industrial Control Systems MSE 483 - Modern Control Systems MSE 405w - The Business of Engineering II, Entrepreneurship for Engineers MSE 428 - Design of Mechanism MSE 452 - Power Conversion in Alternative Energy Systems MSE 413 - Machine Learning in Mechatronics

Please identify your seventh preference MSE course.

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

MSE Course 8:

— MSE 100 - Engineering Graphics and Design MSE 101W - Process, Form and Convention in Professional Genres MSE 102 - Applied Science, Technology and Society MSE 110 - Mechatronics Design I MSE 210 - Engineering Measurement and Data Analysis MSE 220 - Engineering Materials MSE 221 - Statics and Strength of Materials MSE 222 - Kinematics & Dynamics of Rigid Bodies & Mechanisms MSE 223 - Intro to Fluid Mechanics MSE 250 - Electric Circuits MSE 251 - Electronic Circuits MSE 280 - Linear Systems MSE 300 - The Business of Engineering I: Fundamentals MSE 310 - Intro to Electro-Mechanical Sensors and Actuators MSE 311 - Intro to MEMS MSE 312 - Mechatronics Design II MSE 320 - Machine Design MSE 321 - Engineering Thermodynamics and Heat Transfer MSE 352 - Digital Logic and Microcontrollers MSE 353 - Power Electronics & Electric Machinery MSE 380 - Systems Modeling and Simulation MSE 381 - Feedback Control Systems MSE 211 - Computational Methods for Engineers MSE 400 - The Business of Engineering II: Applications and Commercialization MSE 401W - Project Documentation and Group Dynamics MSE 402 - Engineering Ethics, Law and Professional Practice MSE 410 - Capstone Design Technical Project I MSE 411 - Capstone Design Technical Project II MSE 420 - Introduction to Biomechanical Engineering MSE 421 - Advanced Vibration MSE 422 - Fuel Cell Systems MSE 423 - Energy Conversion MSE 424 - Microfluidics MSE 425 - Nano Manufacturing for Nano-scale Devices MSE 426 - Introduction to Engineering Design Optimization MSE 427 - Finite Element Analysis MSE 429 - Advanced Kinematics for Robotic System MSE 450 - Real-Time and Embedded Control Systems MSE 451 - Advanced Electronic Circuits MSE 480 - Manufacturing Systems MSE 481 - Industrial Control Systems MSE 483 - Modern Control Systems MSE 405w - The Business of Engineering II, Entrepreneurship for Engineers MSE 428 - Design of Mechanism MSE 452 - Power Conversion in Alternative Energy Systems MSE 413 - Machine Learning in Mechatronics

Please identify your eighth preference MSE course

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

This field is required.