If you have a SFU account, please login. It will be easier for us and you to keep track of your info if you do.

Last name: 

First name: 

Email address: 

This field is required.

Please note:

1. This entire form will be deleted after 14 days of being inactive.

2. Restricted access: no exchange / study abroad students will be allowed to access the Capstone courses (ENSC 405W and ENSC 440). If a student requests these courses, the request will automatically be denied.

3. Limited access: spaces are limited and exchange / study abroad students will not receive priority enrollment for the following courses: ENSC 251, ENSC 252, ENSC 254, ENSC 470, ENSC 475, ENSC 489, ENSC 495

4. All supporting documentation must be in English. Forms submitted without English documentation will be rejected.

Student Name: 

SFU ID:

Please enter your SFU ID number if known.

Email Address: 

Home Country: 

Home University: 

Degree Program at Home University: 

Please enter the degree you are pursuing at your home institution (e.g. Engineering, Computer Science, etc)

Exchange Term: 

Fall 2024 Spring 2025 Summer 2025 Fall 2025 Spring 2026 Summer 2026 Fall 2026 Spring 2027 Summer 2027 Fall 2027 Spring 2028 Summer 2028 Fall 2028 Spring 2029 Summer 2029

Is this form for your 1st term or 2nd term of exchange?: 

• 1st Exchange term @ SFU
• 2nd Exchange term @ SFU

You may only submit course requests for one upcoming term at a time. You are required to submit a new form before the next term enrollment period if you are staying at SFU for a 2nd term of exchange.

Home University Transcript: 

Please upload a copy of your transcript from your home university showing all courses taken and final grades.

Detailed Course Outlines: 

Please submit detailed course outlines for all courses being used as pre-requisites as part of this request in one pdf file. If outlines are in a language other than English, please submit English translations.

---

ENSC Course 1: 

ENSC 100W Engineering Technology and Society ENSC 105W Process, Form, and Convention in Professional Genres ENSC 120 - Introduction to Electronics Laboratory Instruments Operation and Measurement Techniques ENSC 180 - Introduction to Engineering Analysis ENSC 204 - Graphical Communication for Engineering ENSC 220 - Electric Circuits I ENSC 225 - Microelectronics I ENSC 251 - Software Design and Analysis for Engineers ENSC 252 - Fundamentals in Digital Logic & Design ENSC 254 - Introduction to Computer Organization ENSC 280 - Engineering Measurement and Data Analysis ENSC 304 - Human Factors and Usability Engineering ENSC 316 - Engineering Electromagnetics I ENSC 320 - Electric Circuits II ENSC 324 - Electronic Devices ENSC 325 - Microelectronics II ENSC 327 - Communication Systems ENSC 328 - Random Processes in Engineering ENSC 350 - Digital Systems Design ENSC 351 - Embedded and Real Time System Software ENSC 370 - Biomedical Engineering Directions ENSC 380 - Linear Systems ENSC 383 - Feedback Control Systems ENSC 385 - Statics and Strength of Materials ENSC 386 - Introduction to Mechanical Design ENSC 387 - Introduction to Electro-Mechanical Sensors and Actuators ENSC 406 - Engineering Ethics, Law, and Professional Practice ENSC 410 - The Business of Engineering ENSC 411 - The Business of Entrepreneurial Engineering ENSC 412 - Technologies, Cultures and a Sustainable World ENSC 424 - Multimedia Communications Engineering ENSC 425 - Electronic System Design ENSC 426 - High Frequency Electronics ENSC 427 - Communication Networks ENSC 428 - Digital Communications ENSC 429 - Digital Signal Processing ENSC 450 - VLSI Systems Design ENSC 452 - Advanced Digital System Design ENSC 470 - Optical and Laser Engineering Applications ENSC 472 - Orthopaedic and Rehabilitation Engineering ENSC 474 - Digital/Medical Image Processing ENSC 475 - Biomedical Instrumentation ENSC 476 - Biophotonics and Microscopy Techniques ENSC 477 - Biomedical Imaging Acquisition ENSC 481 - Designing for Reliability ENSC 482 - Introduction to Decision Making in Engineering ENSC 483 - Modern Control Systems ENSC 488 - Introduction to Robotics ENSC 489 - Computer Aided Design and Manufacturing ENSC 495 - Introduction to Microelectronic Fabrication (Note: must also apply directly to instructor) TEKX 101 - Introduction to 3D Printing and Laser Scanning Technologies Other - please specify in the Rationale section

Please identify your first preference ENSC course.

Is this course being offered for your exchange term?: 

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?: 

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?: 

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?: 

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?: 

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

ENSC Course 2:

— ENSC 100W Engineering Technology and Society ENSC 105W Process, Form, and Convention in Professional Genres ENSC 120 - Introduction to Electronics Laboratory Instruments Operation and Measurement Techniques ENSC 180 - Introduction to Engineering Analysis ENSC 204 - Graphical Communication for Engineering ENSC 220 - Electric Circuits I ENSC 225 - Microelectronics I ENSC 251 - Software Design and Analysis for Engineers ENSC 252 - Fundamentals in Digital Logic & Design ENSC 254 - Introduction to Computer Organization ENSC 280 - Engineering Measurement and Data Analysis ENSC 304 - Human Factors and Usability Engineering ENSC 320 - Electric Circuits II ENSC 324 - Electronic Devices ENSC 325 - Microelectronics II ENSC 327 - Communication Systems ENSC 328 - Random Processes in Engineering ENSC 350 - Digital Systems Design ENSC 351 - Embedded and Real Time System Software ENSC 370 - Biomedical Engineering Directions ENSC 380 - Linear Systems ENSC 383 - Feedback Control Systems ENSC 385 - Statics and Strength of Materials ENSC 386 - Introduction to Mechanical Design ENSC 387 - Introduction to Electro-Mechanical Sensors and Actuators ENSC 406 - Engineering Ethics, Law, and Professional Practice ENSC 410 - The Business of Engineering ENSC 411 - The Business of Entrepreneurial Engineering ENSC 412 - Technologies, Cultures and a Sustainable World ENSC 424 - Multimedia Communications Engineering ENSC 425 - Electronic System Design ENSC 426 - High Frequency Electronics ENSC 427 - Communication Networks ENSC 428 - Digital Communications ENSC 429 - Digital Signal Processing ENSC 450 - VLSI Systems Design ENSC 452 - Advanced Digital System Design ENSC 470 - Optical and Laser Engineering Applications ENSC 472 - Orthopaedic and Rehabilitation Engineering ENSC 474 - Digital/Medical Image Processing ENSC 475 - Biomedical Instrumentation ENSC 476 - Biophotonics and Microscopy Techniques ENSC 477 - Biomedical Imaging Acquisition ENSC 481 - Designing for Reliability ENSC 482 - Introduction to Decision Making in Engineering ENSC 483 - Modern Control Systems ENSC 488 - Introduction to Robotics ENSC 489 - Computer Aided Design and Manufacturing ENSC 495 - Introduction to Microelectronic Fabrication (Note: must also apply directly to instructor) TEKX 101 - Introduction to 3D Printing and Laser Scanning Technologies ENSC 316 - Engineering Electromagnetics I Other - please specify in the Rationale section

Please identify your second preference ENSC course if applicable.

Is this course being offered for your exchange term?:

• Yes
• No

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

ENSC Course 3:

— ENSC 100W Engineering Technology and Society ENSC 105W Process, Form, and Convention in Professional Genres ENSC 120 - Introduction to Electronics Laboratory Instruments Operation and Measurement Techniques ENSC 180 - Introduction to Engineering Analysis ENSC 204 - Graphical Communication for Engineering ENSC 220 - Electric Circuits I ENSC 225 - Microelectronics I ENSC 251 - Software Design and Analysis for Engineers ENSC 252 - Fundamentals in Digital Logic & Design ENSC 254 - Introduction to Computer Organization ENSC 280 - Engineering Measurement and Data Analysis ENSC 304 - Human Factors and Usability Engineering ENSC 320 - Electric Circuits II ENSC 324 - Electronic Devices ENSC 325 - Microelectronics II ENSC 327 - Communication Systems ENSC 328 - Random Processes in Engineering ENSC 350 - Digital Systems Design ENSC 351 - Embedded and Real Time System Software ENSC 370 - Biomedical Engineering Directions ENSC 380 - Linear Systems ENSC 383 - Feedback Control Systems ENSC 385 - Statics and Strength of Materials ENSC 386 - Introduction to Mechanical Design ENSC 387 - Introduction to Electro-Mechanical Sensors and Actuators ENSC 406 - Engineering Ethics, Law, and Professional Practice ENSC 410 - The Business of Engineering ENSC 411 - The Business of Entrepreneurial Engineering ENSC 412 - Technologies, Cultures and a Sustainable World ENSC 424 - Multimedia Communications Engineering ENSC 425 - Electronic System Design ENSC 426 - High Frequency Electronics ENSC 427 - Communication Networks ENSC 428 - Digital Communications ENSC 429 - Digital Signal Processing ENSC 450 - VLSI Systems Design ENSC 452 - Advanced Digital System Design ENSC 470 - Optical and Laser Engineering Applications ENSC 472 - Orthopaedic and Rehabilitation Engineering ENSC 474 - Digital/Medical Image Processing ENSC 475 - Biomedical Instrumentation ENSC 476 - Biophotonics and Microscopy Techniques ENSC 477 - Biomedical Imaging Acquisition ENSC 481 - Designing for Reliability ENSC 482 - Introduction to Decision Making in Engineering ENSC 483 - Modern Control Systems ENSC 488 - Introduction to Robotics ENSC 489 - Computer Aided Design and Manufacturing ENSC 495 - Introduction to Microelectronic Fabrication (Note: must also apply directly to instructor) TEKX 101 - Introduction to 3D Printing and Laser Scanning Technologies ENSC 316 - Engineering Electromagnetics I Other - please specify in the Rationale section

Please identify your third preference ENSC course if applicable.

Is this course being offered for your exchange term?:

• Yes
• No

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

ENSC Course 4:

— ENSC 100W Engineering Technology and Society ENSC 105W Process, Form, and Convention in Professional Genres ENSC 120 - Introduction to Electronics Laboratory Instruments Operation and Measurement Techniques ENSC 180 - Introduction to Engineering Analysis ENSC 204 - Graphical Communication for Engineering ENSC 220 - Electric Circuits I ENSC 225 - Microelectronics I ENSC 251 - Software Design and Analysis for Engineers ENSC 252 - Fundamentals in Digital Logic & Design ENSC 254 - Introduction to Computer Organization ENSC 280 - Engineering Measurement and Data Analysis ENSC 304 - Human Factors and Usability Engineering ENSC 320 - Electric Circuits II ENSC 324 - Electronic Devices ENSC 325 - Microelectronics II ENSC 327 - Communication Systems ENSC 328 - Random Processes in Engineering ENSC 350 - Digital Systems Design ENSC 351 - Embedded and Real Time System Software ENSC 370 - Biomedical Engineering Directions ENSC 380 - Linear Systems ENSC 383 - Feedback Control Systems ENSC 385 - Statics and Strength of Materials ENSC 386 - Introduction to Mechanical Design ENSC 387 - Introduction to Electro-Mechanical Sensors and Actuators ENSC 406 - Engineering Ethics, Law, and Professional Practice ENSC 410 - The Business of Engineering ENSC 411 - The Business of Entrepreneurial Engineering ENSC 412 - Technologies, Cultures and a Sustainable World ENSC 424 - Multimedia Communications Engineering ENSC 425 - Electronic System Design ENSC 426 - High Frequency Electronics ENSC 427 - Communication Networks ENSC 428 - Digital Communications ENSC 429 - Digital Signal Processing ENSC 450 - VLSI Systems Design ENSC 452 - Advanced Digital System Design ENSC 470 - Optical and Laser Engineering Applications ENSC 472 - Orthopaedic and Rehabilitation Engineering ENSC 474 - Digital/Medical Image Processing ENSC 475 - Biomedical Instrumentation ENSC 476 - Biophotonics and Microscopy Techniques ENSC 477 - Biomedical Imaging Acquisition ENSC 481 - Designing for Reliability ENSC 482 - Introduction to Decision Making in Engineering ENSC 483 - Modern Control Systems ENSC 488 - Introduction to Robotics ENSC 489 - Computer Aided Design and Manufacturing ENSC 495 - Introduction to Microelectronic Fabrication (Note: must also apply directly to instructor) TEKX 101 - Introduction to 3D Printing and Laser Scanning Technologies ENSC 316 - Engineering Electromagnetics I

Please identify your fourth preference ENSC course if applicable.

Is this course being offered for your exchange term?:

• Yes
• No

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

ENSC Course 5:

— ENSC 100W Engineering Technology and Society ENSC 105W Process, Form, and Convention in Professional Genres ENSC 120 - Introduction to Electronics Laboratory Instruments Operation and Measurement Techniques ENSC 180 - Introduction to Engineering Analysis ENSC 204 - Graphical Communication for Engineering ENSC 220 - Electric Circuits I ENSC 225 - Microelectronics I ENSC 251 - Software Design and Analysis for Engineers ENSC 252 - Fundamentals in Digital Logic & Design ENSC 254 - Introduction to Computer Organization ENSC 280 - Engineering Measurement and Data Analysis ENSC 304 - Human Factors and Usability Engineering ENSC 320 - Electric Circuits II ENSC 324 - Electronic Devices ENSC 325 - Microelectronics II ENSC 327 - Communication Systems ENSC 328 - Random Processes in Engineering ENSC 350 - Digital Systems Design ENSC 351 - Embedded and Real Time System Software ENSC 370 - Biomedical Engineering Directions ENSC 380 - Linear Systems ENSC 383 - Feedback Control Systems ENSC 385 - Statics and Strength of Materials ENSC 386 - Introduction to Mechanical Design ENSC 387 - Introduction to Electro-Mechanical Sensors and Actuators ENSC 406 - Engineering Ethics, Law, and Professional Practice ENSC 410 - The Business of Engineering ENSC 411 - The Business of Entrepreneurial Engineering ENSC 412 - Technologies, Cultures and a Sustainable World ENSC 424 - Multimedia Communications Engineering ENSC 425 - Electronic System Design ENSC 426 - High Frequency Electronics ENSC 427 - Communication Networks ENSC 428 - Digital Communications ENSC 429 - Digital Signal Processing ENSC 450 - VLSI Systems Design ENSC 452 - Advanced Digital System Design ENSC 470 - Optical and Laser Engineering Applications ENSC 472 - Orthopaedic and Rehabilitation Engineering ENSC 474 - Digital/Medical Image Processing ENSC 475 - Biomedical Instrumentation ENSC 476 - Biophotonics and Microscopy Techniques ENSC 477 - Biomedical Imaging Acquisition ENSC 481 - Designing for Reliability ENSC 482 - Introduction to Decision Making in Engineering ENSC 483 - Modern Control Systems ENSC 488 - Introduction to Robotics ENSC 489 - Computer Aided Design and Manufacturing ENSC 495 - Introduction to Microelectronic Fabrication (Note: must also apply directly to instructor) TEKX 101 - Introduction to 3D Printing and Laser Scanning Technologies ENSC 316 - Engineering Electromagnetics I

Please identify your fifth preference ENSC course if applicable.

Is this course being offered for your exchange term?:

• Yes
• No

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

ENSC Course 6:

— ENSC 100W Engineering Technology and Society ENSC 105W Process, Form, and Convention in Professional Genres ENSC 120 - Introduction to Electronics Laboratory Instruments Operation and Measurement Techniques ENSC 180 - Introduction to Engineering Analysis ENSC 204 - Graphical Communication for Engineering ENSC 220 - Electric Circuits I ENSC 225 - Microelectronics I ENSC 251 - Software Design and Analysis for Engineers ENSC 252 - Fundamentals in Digital Logic & Design ENSC 254 - Introduction to Computer Organization ENSC 280 - Engineering Measurement and Data Analysis ENSC 304 - Human Factors and Usability Engineering ENSC 320 - Electric Circuits II ENSC 324 - Electronic Devices ENSC 325 - Microelectronics II ENSC 327 - Communication Systems ENSC 328 - Random Processes in Engineering ENSC 350 - Digital Systems Design ENSC 351 - Embedded and Real Time System Software ENSC 370 - Biomedical Engineering Directions ENSC 380 - Linear Systems ENSC 383 - Feedback Control Systems ENSC 385 - Statics and Strength of Materials ENSC 386 - Introduction to Mechanical Design ENSC 387 - Introduction to Electro-Mechanical Sensors and Actuators ENSC 406 - Engineering Ethics, Law, and Professional Practice ENSC 410 - The Business of Engineering ENSC 411 - The Business of Entrepreneurial Engineering ENSC 412 - Technologies, Cultures and a Sustainable World ENSC 424 - Multimedia Communications Engineering ENSC 425 - Electronic System Design ENSC 426 - High Frequency Electronics ENSC 427 - Communication Networks ENSC 428 - Digital Communications ENSC 429 - Digital Signal Processing ENSC 450 - VLSI Systems Design ENSC 452 - Advanced Digital System Design ENSC 470 - Optical and Laser Engineering Applications ENSC 472 - Orthopaedic and Rehabilitation Engineering ENSC 474 - Digital/Medical Image Processing ENSC 475 - Biomedical Instrumentation ENSC 476 - Biophotonics and Microscopy Techniques ENSC 477 - Biomedical Imaging Acquisition ENSC 481 - Designing for Reliability ENSC 482 - Introduction to Decision Making in Engineering ENSC 483 - Modern Control Systems ENSC 488 - Introduction to Robotics ENSC 489 - Computer Aided Design and Manufacturing ENSC 495 - Introduction to Microelectronic Fabrication (Note: must also apply directly to instructor) TEKX 101 - Introduction to 3D Printing and Laser Scanning Technologies ENSC 316 - Engineering Electromagnetics I

Please identify your sixth preference ENSC course.

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

ENSC Course 7:

— ENSC 100W Engineering Technology and Society ENSC 105W Process, Form, and Convention in Professional Genres ENSC 120 - Introduction to Electronics Laboratory Instruments Operation and Measurement Techniques ENSC 180 - Introduction to Engineering Analysis ENSC 204 - Graphical Communication for Engineering ENSC 220 - Electric Circuits I ENSC 225 - Microelectronics I ENSC 251 - Software Design and Analysis for Engineers ENSC 252 - Fundamentals in Digital Logic & Design ENSC 254 - Introduction to Computer Organization ENSC 280 - Engineering Measurement and Data Analysis ENSC 304 - Human Factors and Usability Engineering ENSC 320 - Electric Circuits II ENSC 324 - Electronic Devices ENSC 325 - Microelectronics II ENSC 327 - Communication Systems ENSC 328 - Random Processes in Engineering ENSC 350 - Digital Systems Design ENSC 351 - Embedded and Real Time System Software ENSC 370 - Biomedical Engineering Directions ENSC 380 - Linear Systems ENSC 383 - Feedback Control Systems ENSC 385 - Statics and Strength of Materials ENSC 386 - Introduction to Mechanical Design ENSC 387 - Introduction to Electro-Mechanical Sensors and Actuators ENSC 406 - Engineering Ethics, Law, and Professional Practice ENSC 410 - The Business of Engineering ENSC 411 - The Business of Entrepreneurial Engineering ENSC 412 - Technologies, Cultures and a Sustainable World ENSC 424 - Multimedia Communications Engineering ENSC 425 - Electronic System Design ENSC 426 - High Frequency Electronics ENSC 427 - Communication Networks ENSC 428 - Digital Communications ENSC 429 - Digital Signal Processing ENSC 450 - VLSI Systems Design ENSC 452 - Advanced Digital System Design ENSC 470 - Optical and Laser Engineering Applications ENSC 472 - Orthopaedic and Rehabilitation Engineering ENSC 474 - Digital/Medical Image Processing ENSC 475 - Biomedical Instrumentation ENSC 476 - Biophotonics and Microscopy Techniques ENSC 477 - Biomedical Imaging Acquisition ENSC 481 - Designing for Reliability ENSC 482 - Introduction to Decision Making in Engineering ENSC 483 - Modern Control Systems ENSC 488 - Introduction to Robotics ENSC 489 - Computer Aided Design and Manufacturing ENSC 495 - Introduction to Microelectronic Fabrication (Note: must also apply directly to instructor) TEKX 101 - Introduction to 3D Printing and Laser Scanning Technologies ENSC 316 - Engineering Electromagnetics I

Please identify your seventh preference ENSC course.

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

Course will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

---

ENSC Course 8:

— ENSC 100W Engineering Technology and Society ENSC 105W Process, Form, and Convention in Professional Genres ENSC 120 - Introduction to Electronics Laboratory Instruments Operation and Measurement Techniques ENSC 180 - Introduction to Engineering Analysis ENSC 204 - Graphical Communication for Engineering ENSC 220 - Electric Circuits I ENSC 225 - Microelectronics I ENSC 251 - Software Design and Analysis for Engineers ENSC 252 - Fundamentals in Digital Logic & Design ENSC 254 - Introduction to Computer Organization ENSC 280 - Engineering Measurement and Data Analysis ENSC 304 - Human Factors and Usability Engineering ENSC 320 - Electric Circuits II ENSC 324 - Electronic Devices ENSC 325 - Microelectronics II ENSC 327 - Communication Systems ENSC 328 - Random Processes in Engineering ENSC 350 - Digital Systems Design ENSC 351 - Embedded and Real Time System Software ENSC 370 - Biomedical Engineering Directions ENSC 380 - Linear Systems ENSC 383 - Feedback Control Systems ENSC 385 - Statics and Strength of Materials ENSC 386 - Introduction to Mechanical Design ENSC 387 - Introduction to Electro-Mechanical Sensors and Actuators ENSC 406 - Engineering Ethics, Law, and Professional Practice ENSC 410 - The Business of Engineering ENSC 411 - The Business of Entrepreneurial Engineering ENSC 412 - Technologies, Cultures and a Sustainable World ENSC 424 - Multimedia Communications Engineering ENSC 425 - Electronic System Design ENSC 426 - High Frequency Electronics ENSC 427 - Communication Networks ENSC 428 - Digital Communications ENSC 429 - Digital Signal Processing ENSC 450 - VLSI Systems Design ENSC 452 - Advanced Digital System Design ENSC 470 - Optical and Laser Engineering Applications ENSC 472 - Orthopaedic and Rehabilitation Engineering ENSC 474 - Digital/Medical Image Processing ENSC 475 - Biomedical Instrumentation ENSC 476 - Biophotonics and Microscopy Techniques ENSC 477 - Biomedical Imaging Acquisition ENSC 481 - Designing for Reliability ENSC 482 - Introduction to Decision Making in Engineering ENSC 483 - Modern Control Systems ENSC 488 - Introduction to Robotics ENSC 489 - Computer Aided Design and Manufacturing ENSC 495 - Introduction to Microelectronic Fabrication (Note: must also apply directly to instructor) TEKX 101 - Introduction to 3D Printing and Laser Scanning Technologies ENSC 316 - Engineering Electromagnetics I

Please identify your eighth preference ENSC course.

Is this course being offered for your exchange term?:

• Yes
• No
• Courses not yet posted for my term

Use go.sfu.ca to check when the course is being offered at SFU. Please only choose courses that are offered in the semester you will be attending.

SFU Pre-requisite - How many SFU-completed units/credits are required?:

ourse will be denied if you do not have enough completed credits shown on your home university transcript. Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

SFU Pre-requisite - What are the SFU courses required?:

Use the SFU Calendar (www.sfu.ca/calendar) to check for course pre-requisites. Look under *All Courses*. Not all courses have this requirement. If none listed, write N/A or 0.

What are the equivalent pre-requisite(s) you are using from your Home University?:

Indicate the courses you have taken to meet each SFU pre-requisites (e.g. SFU MACM 101 = Course 'x' from home institution) Be sure you are uploading these course outlines to the "Detailed Course Outlines" field

Is this course required for your degree?:

• Yes
• No

We are asking for information only and does not guarantee access.

Rationale for taking this course:

Please indicate if you have specific reasons why you need to take this course on your exchange term.

This field is required.