Subject: Re: Cirrus Logic 5426 Graph Card
From: gardner_a@kosmos.wcc.govt.nz (andy gardner)

In article <1qms3c$37t@news.cs.tu-berlin.de>, wong@cs.tu-berlin.de (Wolfgang Jung) writes:
>After setting up Windows for using my Cirrus Logic 5426 VLB GraphicsCard
>It moved a normal Window from one place to another...

>...What I was wondering why is it not using the BITBLT  Engine which
>is suuposed to be on the Chip.

>How are the experiences here..
>Have I done something wrong ?

The 5426 has its own set of drivers. You may be using the
drivers intended for the 5420 or 5422 by mistake.

Be sure you have the 5426 driver version 1.2

>(I installed the MSWIN 3.1 MultiResolution drivers which where supplied 
>with the Card ?!)

Don't quote me on this one, but I'd steer clear of the
multi resolution driver that allows you to change resolution
without exiting Windows.  I think it's buggy.

>Also if there are new(hopefully faster) drrivers around I would love to 
>how to get hold of them :-) (ftp or whatsoever :-) )

Version 1.3 drivers are due to be release by Cirrus soon.
Unfortunately, their not available via FTP, you have to dial
up their BBS in the USA.  I do this from NZ using a 14.4k modem
to cut down on phone bills.  It took me around 7 minutes to 
download the v1.2 driver.


Good Luck,  

Andy Gardner,
Wellington, New Zealand
Te Whanga-nui-a-Tara, Aotearoa
